Commercial Gas Leak Detectors
- Applications
- Common Features for LPG/PNG or CO detectors.
- Technical Specifications
- MODELS & Features.
Applications
Vighnaharta Security takes pleasure to introduce "TrueSafe" range of Commercial Grade Gas Leak Detectors. Safety of commercial kitchens & premises is of prime importance these days. Our LPG/PNG/CO/CO2 & VOC detectors can detect respective gases and warn before the gas density in air reaches unwanted levels. In addition it provides early warnings by detection of Heat in case of LPG/PNG detectors.
Some of the unique features of these models are…
- Only detector available which is Kitchen Platform Panel mountable.
- 100% more effective than competing Products in terms of ability to detect LPG.
- In addition to LPG leaks it can detect heat, very useful features for kitchens.
- Automatic Calibration at the desired level of LEL (Usually 10% of LEL).
- Bargraph gas concentration level indication (in models TS12F and TS230F).
- Models available with flasher (TS12F & TS230F).
- Models available for VOC, CO2 and CO as well.
Commercial Grade Gas Leak Detectors use better quality sensors suitable for commercial use. Sensor is more reliable, consistent and accurate. These are also capable of integrating with Building Management Systems (BMS). They are useful in following applications….
- Restaurant Kitchens, Industrial & other Canteens
- Hotels, Malls & Offices
Common Features for commercial detectors.
- +9VDC to +32VDC Operation
- Options to detect Natural Gas & LPG, VOC, CO2 or CO
- Auto reset after gas concentration drops below Alarm Level
- High reliability sensor
- Using microprocessor for circuit control and gas monitoring to assure performance stability and reliability
- Kitchen Platform Panel mounting facility to enable detection of leaks near Burner and also near cylinder
- Intelligent algorithm avoids false alarms
- Easy installation and maintenance
- Complies with the CE certification. Patent applied
- Optional Relay Output
- Optional Siren Output
- Optional RS485 Output
- Optional 0-10VDC Output
- Optional 4-20mA Output
- Optional concentration display digital LED / Digital LCD
- Optional Drive Circuit to turn OFF Electromagnetic Valve or Manipulator
- One year limited warranty
Technical Specifications
- Humidity Range : 5% - 95% relative humidity (RH)
- Sensor Type : Semiconductor, Catalytic, Electrochemical (Depending upon type of gas)
- Power Consumption approx. : 2.5W
- Warm up time 2 - 5 minutes
- Room Temp : -100 C to + 700 C
- Alarm output : RED LED to indicate Gas leak & YELLOW LED to indicate excessive heat
- LPG Detection Alarm Level : 2000 Parts per million (ppm) i.e. 10 % of Lower Explosive Limit (LEL)
- CO Detection Alarm Level : 150ppm
- CO2 Detection Alarm Level : 500 to 2000PPM
- Alarm response time : 20 Seconds
- Installation : Wall mounted/Panel mounted /Ceiling mounted
- Dimensions : 111 mm x 90 mm x 40 mm ABS Plastic enclosure
MODELS & Features
Commercial Grade TrueSafe LPG/PNG Detector with Flasher -Network Type
- Relay output
- Optional RS485, 0-10VDC, 4-20mA outputs
- Optional LCD Display
Commercial Grade TrueSafe with Valve Control or Manipulator Control for LPG/PNG
- Output to shut-off the control valve to cut-off the gas supply or output to operate manipulator
- +12V, +24V or 230VAC Operation
Applications
TS230FV and TS12FV are ideally suitable for applications where additional safety is required. The detector is positioned in such a way that gas leakage is detected as soon as possible. The output of the detector drives the control valve. Control valve is fitted in gas line. Once the leakage is detected valve cuts off the gas supply in less than 1Sec by shutting off the valve. The valve can be reset or opened only manually. This provides additional safety and allows manual inspection before resuming the gas supply.
This model also provides Bargraph indication for level of concentration of gas. Four levels, 2.5%, 5%, 7.5% & 10% of LEL are provided. Integrated Flasher and Buzzer provides indication when concentration crosses 10% of LEL.
Detector also provides potential free contact output (NC & NO). This can be used to connect Gas Alarm Panels, Intrusion Alarm Panels or Video Door Phones with Gas Sense input. This output remains triggered till gas concentration is above 10% of LEL.
Both the models are suitable for following applications..
- Restaurant Kitchens
- Industrial Kitchens
- Pantries
- Home Kitchens
Commercial Grade TrueSafe CO Detector with Flasher -Network Type
- Relay output
- Optional RS485, 0-10VDC, 4-20mA outputs
- Optional LCD Display
Commercial Grade TrueSense CO2 Detector with Flasher -Network Type
- Relay output
- Optional RS485, 0-10VDC, 4-20mA outputs
- Optional LCD Display
Commercial Grade TrueSense VOC Detector with Flasher -Network Type
Applications
- School Class Rooms
- Office Buildings
- Parking Garages
- Washroom Ventilation Fans
- Cigarette Smoke Detectors
- HVAC Air Quality Applications
Features
- True Air Quality Monitor
- Microprocessor based controller
- Analog, RS485 & Relay Output options
- ADC—10 bit resolution
- Integral sensitivity adjustment
- Ability to directly control air handling unit
- Visual indication of air quality (internal)
- No calibration required
TrueSense Alcohol Breathe Analysers – Model : Police
For security reasons, driving after consuming alcohol is banned in all the countries. It poses measure security threat to citizens. Reporting to work immediately after consumption of alcohol is also not allowed. This equipment helps to measure alcohol content by analyzing the breath. It can be used by…
- Police
- Security Staff of offices, industries, BPO’s
- Travel & Tour operators
- Taxi Services, Rental car services Etc…..
System provides rechargeable battery backup for about 300 operations in a single charge. Printer can be attached to this model externally.
Top
E-mail: sales@vighnaharta.in